(714)777-1200

Pentair SuperFlo .75HP High Efficiency Motor | 355008S

SKU: 355008S
Weight: 15 lbs
Units in Stock: 4

#355008S Pentair SuperFlo WFE-3, High Efficiency Motor .75HP
List Price: $199.00
Price: $189.99
You Save: $9.01 (5%)
Pentair SuperFlo .75HP High Efficiency Motor | 355008S
Pentair SuperFlo .75HP High Efficiency Motor | 355008S
Product Details

#355008S Pentair SuperFlo Pump, High Efficiency Motor .75HP
The new #355008S Supercedes the #071313S Motor design.
Original Genuine Replacement Motor, Almond
The SuperFlo, New Centurion, Original replacement motor features threaded shaft and durable commercial duty 56 frame motor with NEMA energy-efficient square flange design.

Old' style motors are 'Magntek' type motors.
'New' style motors are 'New Centurian' type Almond Black
This is a guide of motor part numbers associated with standard Pentair
Aquatic Systems pool pumps.motors.
Pentair pumps started changing-over to 'New' Style motors in mid-2012. As the change-over process continues; all single-speed pumps will be changed-over to 'New' style motors in 2013. Order replacement motor kits using 'New' style part numbers.
The 'New' motor has improved quality and better features.

High Efficiency Motors:

Almond Motors                             Black Motors                  
Old Part#    New#                        Old Part#            New#
071313S      355008S                  355391S           355009S

How is the ‘New’ Motor Better Than the ‘Old’ Motor?
1) Higher Ambient Temp Rating: The ‘New’ motor has a 50-degree-celcius ambient
temp rating, as opposed to the 40-degree-celcius rating of the ‘Old’ motor.
2) Improved Bearing Configuration: The ‘New’ motor has shaft bearings which are
pressed more tightly into end frame castings; where the bearings are constrained around
their outside diameter by a bushing and a ring of steel which is insert-cast into the
aluminum end frame. This improved bearing configuration reduces instances of the
vibration/failure in which the bearing O.D. vibrates against the I.D. of the end frame
casting.
3) Ease-of-Wiring: The ‘New’ motor has an easier-to-wire terminal block compared to the
‘Old’ motor. The ‘Old’ motor has a small half-moon shaped wiring compartment cover; it
can be challenging to pull the electrical wires through the conduit port and fix them into
place at the electrical terminal screws. The ‘New’ motor has a large plastic shell which
encapsulates the terminal block area. The plastic shell removes with one screw, revealing
the terminal block area, allowing clear and easy access from a wider range of angles.

www.pentairpool.com