• The cart is empty.
    {{shoppingcart.totalQuantityDisplay}}
    Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}
    • (714)777-1200
  • The cart is empty.
    {{shoppingcart.totalQuantityDisplay}}
    Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}
    • TC Pool Equipment Co. LLC
    (714)777-1200

    Dolphin Robotic S300i Pool Cleaner Cable with Swivel | 99958906-DIY

    Our Products: Parts > Dolphin Robotic Pool Cleaner Parts
    SKU: 99958906-DIY
    Weight: 7 lbs
    Units in Stock: 18
    #99958906-DIY Dolphin S300i Robotic Pool Cleaner Swivel Cable
    GTIN: 718117198298
    Price: $199.00
    Add to Wishlist Add to Wishlist
    Dolphin Robotic S300i Pool Cleaner Cable with Swivel | 99958906-DIY
    Dolphin Robotic S300i Pool Cleaner Cable with Swivel | 99958906-DIY
    Previous Item Previous Item   Next Item Next Item
    Product Details
    Dolphin Dynamic Plus DX5 Robotic Cleaner | DX5
    #99958906-DIY Dolphin S300i Robotic Pool Cleaner Cable, with Swivel 
    Accommodates Models:
    Complete Replacement Cable, 18MM Blue
    Product Description
    60' Swivel Cable, with Molded (DIY) Motor Plug, Metal Spring, and 2 wires

    Maytronics Robotic Cables are currently designated as Assembly (ASSY) or DIY (Do It Yourself) depending on the design of the plug on the motor end of the cable. For most of the older Robotic models, the cord was installed through the small hole in the SIDE panel of the cleaner. The opening on the side was too small for the cord to go through with the plug on the end, so the wires needed to be threaded through the opening first and then attached to a plug with a Retrofit Kit before being connected to the motor. These cables with "assembled” plugs are designated as "ASSY” at the end of the cable’s manufacturing code.

    To improve the plug design, Maytronics created a molded plug that was permanently attached to the motor end of the cable. Instead of coming through the small hole in the side, the cable entered through the TOP of the cleaner and was simply plugged into the top of the motor. Because this cable design was much simpler to install, it was designated as "DIY” for Do It Yourself at the end of the cable’s manufacturing code.

    Other differences between the Robotic cables include: the length of the cable; whether they have a swivel; their type of protective spring (DIY cables only); and whether they have 2 wires or three. 
    The Maytronics Dolphin 18MM Cable fits the following Robotic Pool Cleaners:
    S300
    S300i
    S400
    Active 30
    Active 30i
    Active 40
    Premium
    Prowler 930
    Pentair Warrior SI
    T45
    T55i
    Proteus DX5i

    www.maytronicsus.com