Accommodates Models:
Complete Replacement Cable, 18MM Blue
Product Description
60' Cable, with Molded (DIY) Motor Plug, Metal Spring, and 2 wires
Maytronics Robotic Cables are currently designated as Assembly (ASSY) or DIY (Do It Yourself) depending on the design of the plug on the motor end of the cable. For most of the older Robotic models, the cord was installed through the small hole in the SIDE panel of the cleaner. The opening on the side was too small for the cord to go through with the plug on the end, so the wires needed to be threaded through the opening first and then attached to a plug with a Retrofit Kit before being connected to the motor. These cables with "assembled” plugs are designated as "ASSY” at the end of the cable’s manufacturing code.
To improve the plug design, Maytronics created a molded plug that was permanently attached to the motor end of the cable. Instead of coming through the small hole in the side, the cable entered through the TOP of the cleaner and was simply plugged into the top of the motor. Because this cable design was much simpler to install, it was designated as "DIY” for Do It Yourself at the end of the cable’s manufacturing code.
Other differences between the Robotic cables include: the length of the cable; whether they have a swivel; their type of protective spring (DIY cables only); and whether they have 2 wires or three.
The Maytronics Dolphin 18MM Cable fits the following Robotic Pool Cleaners:
S300
S300i
Active 30
Active 30i
Premium
Prowler 930
www.maytronicsus.com 
View Cart {{shoppingcart.totalQuantityDisplay}} Item(s)
