Browse by Category

 Above Ground Pool and...
 Automation Products
 Blowers
 Cells
 Chlorine Generators
 Cleaners
 Deck Equipment
 Filters
 Heat Pumps
 Heaters
 Lights
 Parts
 Patio
 Pool Equipment Sets
 Pool Supplies
 Pumps
 Salt Chlorinator Syste...
 Spas
 Valves
 White Goods

Raypak 336 Digital ASME Heater 0-2000 ft. | C-R336A-EN-C #50

SKU: 009270
Weight: 250 lbs
Units in Stock: 1

#009270 Raypak by Rheem 336 Digital, ASME Certified, Pool and Spa Heater, Natural Gas
More details...
Price: $1,979.99
Save to my Wish List Tell a friend
Raypak 336 Digital ASME Heater 0-2000 ft.  | C-R336A-EN-C #50
Raypak 336 Digital ASME Heater 0-2000 ft. | C-R336A-EN-C #50
Previous Item   Next Item
 
Product Details
Raypak 407 Digital LowNOx Heater 009243 | P-R407AL-EN-C #26
#009270 Raypak by Rheem 336 Digital, ASME Certified, Pool and Spa Heater, Natural Gas
Elevation: 0-2000 (feet)
#009270 Raypak Model# C-R336A-EN-C #50
Rheem Model# C-M336A-EN-C #50
Not for use in parts of California!

These units meet the ASME pressure vessel requirements demanded by code for commercial installations over 200,000 BTUH and are certified to the ANSI Z21.56 pool heater standard. So dive in and take a look at the Raypak heater that can meet your exact needs. Just click on the links below for more information. Rugged cast-iron headers with porcelainized waterways provide the strength that tough ASME requirements demand.

The Raypak 336 ASME gas heater has a polyester-coated, non-corrosive cabinet that is more durable than solventborne- and waterborne-coated metal cabinets. Every piece of sheet metal goes through a 7-stage wash system, making certain the powder paint has a perfect bond. Underneath the tough, yet beautiful finish you will find galvanized metal that offers superior rust prevention and years of durable service.

Wind-Resistant Design
No need for fans to combat drafting problems under normal conditions. This heater is designed to draft naturally in outdoor installations with its exclusive low-profile design. It is so thoughtfully and carefully designed, it actually protects itself from the things that tend to stifle ordinary pool and spa heaters. It delivers uninterrupted heating performance regardless of falling leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow, etc.

Control Options
These Raypak 336 ASME units are available with two different control designs to meet your requirement. They are available with digital electronic ignition, or as a millivolt design. The digital system (pictured) requires external power (120VAC or 240VAC) and generates a pilot only when there is a call for heat. It provides simple setup and easy programming, as well as easy-to-understand diagnostics and simple connections to remote controls. The millivolt ignition system does not require external power. It generates its' own current internally, with a small thermocouple driven by the constant pilot. The millivolt ignition system is not available in California for natural gas units. See Digital vs Millivolt for more details.

All-Copper-Fin-Tube Heat Exchanger
The fin tubes of the heat exchanger are each made from a single piece of extruded copper. This integral-fin design allows maximum heat transfer to be attained and maintained. Cupro-nickel is also available as an optional upgrade.

Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak heaters with the polymer headers. This allows for a completely nonferrous waterway, leaving your pool truly rust-free.

CPVC 2" Water Connections
Standard with every Raypak is a set of 2" slip-fit CPVC water connections to make your installation secure and effortless.

Condensation Protection
The Unitherm Governor inside the header helps reduce condensation from low inlet water temperatures. It automatically regulates the water flow to help keep the water temperature in the heat exchanger above 105F. Both water temperature and water flow rate are controlled to eliminate condensation, sooting, and scale build-up that can shorten heater life.

High Flow Rates
The Raypak gas heater comes with an automatic bypass built into the header. You'll find that the heater is capable of handling water flow at a rate up to 125 GPM.

Burner Tray
Every burner tray is built to last, from the stainless steel burners to the aluminized metal used in the heat sensitive areas. Innovative design allows for the easy removal of the tray and burners for servicing.

Fire Tile
A ceramic fiber combustion box keeps your heater running efficiently while keeping the outside jacket cool. By using this space-age material the heater won't retain residual heat after it is turned off, allowing it to be installed without the use of costly metal heat sinks.

Fuel-Efficient
Energy-smart Raypak heaters consistently achieve the highest efficiency ratings. They exceed all federal and state standards.

www.raypak.com
Raypak Pool Heater Models R206A-R406A & R207A-R407A Installation & Operating Manual

Payment and Shipping Options - Connect with Facebook, Twitter, Google Plus and YouTube TC Pool Equipment on Facebook
Search by brand