 #014951 Raypak 266 Digital Cupro-Nickel, Pool and Spa Heater, Propane, 0-2000 (feet) Elevation
                #014951 Raypak 266 Digital Cupro-Nickel, Pool and Spa Heater, Propane, 0-2000 (feet) Elevation
 
 Free Shipping!
 Not for use in California and Texas!
                Available Models:
                Raypak Part #014951  Model #P-R266A-EP-X #58
                Rheem Part  #014979  Model #P-M266A-EP-X #58
Cupro-nickel's    major advantage over standard copper is that it's more tolerant of  bad   water chemistry and is more resistant to erosion thanks to a  harder   surface and a wall that is approximately 50% thicker. When you  are   unsure of your ability to maintain the pool or spa water chemistry  a   cupro-nickel heat exchanger is a cost-effective way to protect  against   premature failure.
 
                                PolyTuf Textured Powder Coating
                The     Raypak 266 Digital Cupro-Nickel gas heater has a polyester-coated, non-corrosive cabinet that    is  more durable than solventborne- and waterborne-coated metal    cabinets.  Every piece of sheet metal goes through a 7-stage wash    system, making  certain the powder paint has a perfect bond. Underneath    the tough, yet  beautiful finish you will find galvanized metal that    offers superior  rust prevention and years of durable service.
                Wind-Resistant Design
                No     need for fans to combat drafting problems under normal conditions.    This  heater is designed to draft naturally in outdoor installations    with its  exclusive low-profile design. It is so thoughtfully and    carefully  designed, it actually protects itself from the things that    tend to  stifle ordinary pool and spa heaters. It delivers uninterrupted    heating  performance regardless of falling leaves, wind, airborne    debris, rain,  downdrafts, updrafts, sleet, snow, etc.
                Control Options
                These     Digital Cupro-Nickel units are available with two different control designs to meet your     requirement.  They are available with digital electronic ignition, or   as   a millivolt design. The digital system (pictured) requires  external    power (120VAC or 240VAC) and generates a pilot only when  there is a  call   for heat.  It provides simple setup and easy  programming, as well  as   easy-to-understand diagnostics and simple  connections to remote    controls. The millivolt ignition system does  not require external power.     It generates its' own current  internally, with a small thermocouple    driven by the constant pilot. The millivolt ignition system is not available in California for natural gas units. See Digital vs Millivolt for more details.
                
                Polymer Headers
                Polymer headers prevent rust stains from harming your pool’s surface, giving you years of trouble-free swimming pleasure.
                
                All-Copper-Fin-Tube Heat Exchanger
                The     fin tubes of the heat exchanger are each made from a single piece of     extruded copper. This integral-fin design allows maximum heat  transfer    to be attained and maintained. Cupro-nickel is also  available as an    optional upgrade.
                Stainless Steel Tube Sheet
                Stainless     steel tube sheets are used on all Raypak heaters with the polymer     headers. This allows for a completely nonferrous waterway, leaving your     pool truly rust-free.
                CPVC 2" Water Connections
                Standard with every Raypak Digital Cupro-Nickel is a set of 2" slip-fit CPVC water connections to make your installation secure and effortless.
                Condensation Protection
                The     Unitherm Governor inside the header helps reduce condensation from   low   inlet water temperatures. It automatically regulates the water   flow to   help keep the water temperature in the heat exchanger above   105°F.  Both  water temperature and water flow rate are controlled to   eliminate   condensation, sooting, and scale build-up that can shorten   heater life.
                High Flow Rates
                The     Raypak gas heater comes with an automatic bypass built into the    header.   You'll find that the heater is capable of handling water flow    at a  rate up to 125 GPM.
                Burner Tray
                Every Digital Cupro-Nickel burner tray is built to last, from the stainless steel burners to  the    aluminized metal used in the heat sensitive areas. Innovative  design    allows for the easy removal of the tray and burners for  servicing.
                Fire Tile
                A     ceramic fiber combustion box keeps your heater running efficiently     while keeping the outside jacket cool. By using this space-age  material    the heater won't retain residual heat after it is turned  off, allowing    it to be installed without the use of costly metal heat  sinks.
                Fuel-Efficient
                Energy-smart Raypak heaters consistently achieve the highest efficiency ratings.  They exceed all federal and state standards.
www.raypak.com                                                                                                                Raypak Digital Pool & Spa Heaters Brochure