Browse by Category

 Above Ground Pool and...
 Automation Products
 Blowers
 Cells
 Chlorine Generators
 Cleaners
 Deck Equipment
 Filters
 Heat Pumps
 Heaters
 Lights
 Parts
 Patio
 Pool Equipment Sets
 Pool Supplies
 Pumps
 Salt Chlorinator Syste...
 Spas
 Valves
 White Goods

Raypak 206 Digital Heater 6000-9000 ft. | P-R206A-EN-C #52

SKU: 009846
Weight: 187 lbs
Units in Stock: 2

#009846 Raypak 206 Digital Pool and Spa Heater, Natural Gas
More details...
List Price: $2,938.00
Price: $1,399.99
You Save: $1,538.01 (52%)
Save to my Wish List Tell a friend
Raypak 206 Digital Heater 6000-9000 ft.  | P-R206A-EN-C #52
Raypak 206 Digital Heater 6000-9000 ft. | P-R206A-EN-C #52
Previous Item   Next Item
 
Product Details
Raypak 407 Digital LowNOx Heater 009243 | P-R407AL-EN-C #26
#009846 Raypak 206 Digital Pool and Spa Heater, Natural Gas
High Elevation: 6000-9000 Altitude (feet)
Available Models:
#009846 Raypak Model#
P-R206A-EN-C #52
#009970 Rheem Model#
P-M206A-EN-C #52
#010002 Ruud   Model# P-D206A-EN-C #52
Not for use in parts of Southern California!

PolyTuf Textured Powder Coating
The Raypak 206 Digital High Altitude gas heater has a polyester-coated, non-corrosive cabinet that is more durable than solventborne- and waterborne-coated metal cabinets. Every piece of sheet metal goes through a 7-stage wash system, making certain the powder paint has a perfect bond. Underneath the tough, yet beautiful finish you will find galvanized metal that offers superior rust prevention and years of durable service.

Wind-Resistant Design
No need for fans to combat drafting problems under normal conditions. This heater is designed to draft naturally in outdoor installations with its exclusive low-profile design. It is so thoughtfully and carefully designed, it actually protects itself from the things that tend to stifle ordinary pool and spa heaters. It delivers uninterrupted heating performance regardless of falling leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow, etc.

Control Options
These Raypak 206 Digital High Elevation units are available with two different control designs to meet your requirement. They are available with digital electronic ignition, or as a millivolt design. The digital system (pictured) requires external power (120VAC or 240VAC) and generates a pilot only when there is a call for heat. It provides simple setup and easy programming, as well as easy-to-understand diagnostics and simple connections to remote controls. The millivolt ignition system does not require external power. It generates its' own current internally, with a small thermocouple driven by the constant pilot. The millivolt ignition system is not available in California for natural gas units. See Digital vs Millivolt for more details.

Polymer Headers
Polymer headers prevent rust stains from harming your pool’s surface, giving you years of trouble-free swimming pleasure.

All-Copper-Fin-Tube Heat Exchanger
The fin tubes of the heat exchanger are each made from a single piece of extruded copper. This integral-fin design allows maximum heat transfer to be attained and maintained. Cupro-nickel is also available as an optional upgrade.

Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak heaters with the polymer headers. This allows for a completely nonferrous waterway, leaving your pool truly rust-free.

CPVC 2" Water Connections
Standard with every Raypak is a set of 2" slip-fit CPVC water connections to make your installation secure and effortless.

Condensation Protection
The Unitherm Governor inside the header helps reduce condensation from low inlet water temperatures. It automatically regulates the water flow to help keep the water temperature in the heat exchanger above 105°F. Both water temperature and water flow rate are controlled to eliminate condensation, sooting, and scale build-up that can shorten heater life.

High Flow Rates
The Raypak gas heater comes with an automatic bypass built into the header. You'll find that the heater is capable of handling water flow at a rate up to 125 GPM.

Burner Tray
Every burner tray is built to last, from the stainless steel burners to the aluminized metal used in the heat sensitive areas. Innovative design allows for the easy removal of the tray and burners for servicing.

Fire Tile
A ceramic fiber combustion box keeps your heater running efficiently while keeping the outside jacket cool. By using this space-age material the heater won't retain residual heat after it is turned off, allowing it to be installed without the use of costly metal heat sinks.

Fuel-Efficient
Energy-smart Raypak heaters consistently achieve the highest efficiency ratings. They exceed all federal and state standards.

www.raypak.com
Raypak Digital Pool & Spa Heaters Brochure

Payment and Shipping Options - Connect with Facebook, Twitter, Google Plus and YouTube TC Pool Equipment on Facebook
Search by brand